Chinese English  
The Expert of Industrial Parts
for Global Market

Transmission Parts
Fluid Connectors & Fittings
Special Parts & Process
Electric Hardware

Industrial Zone, Xuejiaqiao,
Zhuangqiao, Ningbo,
Tel.: + 86 574 2785 0001
Fax: + 86 574 2785 0011


    Quality Assurance

We operate quality assurance system according ISO9001:2008,
We make a lot of special parts for customer’s specifications, so we are take more concern on the quality assurance before production. Technical study is necessary before serious production, confirm the design and drawing approval was very useful before serious production. Initial samples inspection is very important before serious production. Bulktek will according to the agreement, standard or special requirement, dependent on approval of initial samples then run the serious production.

During production process, the process control was the most important things to influence the quality level of the goods.

Final inspection and out inspection with full inspection report, can avoid any risk before shipment.

Actually, to reach the high level quality control, we have to operate a lot of programs and issue report, this is what Bulktek always concern and keep improve to do the best for our client.

    Lab Instruments

The main equipment list in Bulktek’s Laboratory.
180 times projector,
Rockwell hardness tester,
Salty spray tester,
Digital thickness meter …
We can perform industrial fasteners, mechanical parts and electric units test and performance test, assure the goods meet the customer and international standard demands.
Important: Some equipment we don’t have, like strength test, but we will do the test from the third party organization if necessary.

Projector   Rockwell Hardness Tester
Salt Spray Tester   Digital Thickness Meter
Linear Measurements     Digital Height Gauge
    Certificate & Report available

The following certificate, report was available if necessary:
EN10304/DIN 50094 3.1.B
EN10304/DIN 50094 3.2
Initial samples report
Final inspect report
Third Party Test Report
Other report & certificate will be available dependent on negotiation.

    Certificate of ISO 9001:2008

ISO 9001:2008 Approved
8 - 12 April 2013
Hannover, Germany
Hall 20, Stand B04/1-2
4 - 8 March, 2014
Las Vegas, Nevada,
USA 82240-3
Home   |   About us   |   Quality System   |   Technical Support   |  Contacts